Verified Service

Chemical Analysis in Jeddah

Book a water or soil sample and get results within days — turbidity, total hardness, calcium, magnesium, pH, sulfates and chlorides, for drinking, irrigation, sewage, well, hotel and farm water.

Chemical Analysis

Chemical Analysis of Soil and Water in Jeddah

Chemical analysis in Jeddah (Jiddah) is useful when the engineering question concerns salts, groundwater, or coastal exposure. Chlorides, sulfates, and salinity often deserve attention in coastal and low settings, but a district name does not establish sample chemistry. Reliable work begins with a known source and suitable collection, container, preservation, and transport.

Define analytes first

Soil or water scope may include pH, sulfates, chlorides, TDS, or conductivity, plus other parameters required by the designer or specification. Record whether the sample is soil, groundwater, or another water source, together with its point, depth, and time. Results are compared with project requirements and applicable ASTM, SASO, or SBC references, not generalized between sites.

Collection coverage

Our Jeddah field team covers points in Ash-Shati, Al-Balad, Al-Fayha, and Al-Khumrah, and extends to Obhur, Salman Bay, and Thuwal. On normal days, group windows run from 5–25 minutes for the nearest districts to 90–120 minutes for Thuwal. Safe access to a borehole or excavation may affect the visit.

Specify analytes before selecting containers, assign a unique code to every point and depth, never combine sources, and confirm volume and preservation requirements in advance. Coastal humidity does not mean every site has identical exposure. Samples follow the agreed laboratory workflow, while material and design decisions remain with the responsible specialist.

Areas We Cover in Jeddah

Our Jeddah field team covers 153 districts across 14 municipal coverage groups. Listed times are typical on normal days and may vary with traffic and site readiness.

Taybah Municipality

≈ 5–25 min
15 districts · Show districts

Al-Furusiyah, Al-Bashair, Ar-Rahmaniyah, Al-Falah, Al-Hamdaniyah, As-Salihiyah, Al-Hijaz, At-Tawfiq, Al-Mawaddah, Al-Bayan, An-Nada, Al-Widad, As-Safwah, Al-Budur, Al-Wafa

Briman Municipality

≈ 15–35 min
13 districts · Show districts

Briman, Al-Ajawid, Al-Manar, As-Samir, Al-Muntazah, Ar-Rayyan, Al-Kawthar, East Umm Hablain, West Umm Hablain, Ar-Rawasi, At-Tilal, Al-Asla, King Fahd

Umm As-Salam Municipality

≈ 15–35 min
14 districts · Show districts

Umm As-Salam, Al-Mahamid, Al-Harazat, Ash-Shuruq, Al-Wahah, Quwayzah, Al-Muntazahat, An-Nakhil (Abraq Ar-Rughamah), Ar-Rughamah, Muraikh, Al-Qaws, Kinanah, Quba, East As-Sulaymaniyah

Airport Municipality

≈ 20–35 min
6 districts · Show districts

An-Nuzhah, Al-Marwah, Ar-Rabwah, As-Safa, Al-Bawadi, Al-Faysaliyah

Historic Jeddah (Al-Balad)

≈ 25–40 min
5 districts · Show districts

Al-Balad, Al-Mazlum, Ash-Sham, Al-Yaman, Al-Bahr

Al-Balad Municipality

≈ 25–40 min
7 districts · Show districts

Al-Kandarah, East Al-Baghdadiyah, West Al-Baghdadiyah, Al-Hindawiyah, As-Sabil, As-Sahifah, Al-Ammariyah

Ash-Sharafiyah Municipality

≈ 25–40 min
5 districts · Show districts

Ash-Sharafiyah, An-Naseem, Bani Malik, Al-Wurud, Ar-Ruwais

Al-Aziziyah Municipality

≈ 25–40 min
5 districts · Show districts

Al-Aziziyah, Al-Andalus, Al-Hamra, Mishrifah, Ar-Rihab

Al-Jami’ah Municipality

≈ 25–45 min
12 districts · Show districts

Al-Jami’ah, Ar-Rawabi, As-Sulaymaniyah, Al-Fayha, Ath-Thaghr, An-Nazlah Al-Yamaniyah, East An-Nazlah, Al-Qurayyat, Ath-Thaalibah, Petromin (Al-Karantina), Ghulail, Madain Al-Fahd

South Municipality

≈ 25–55 min
30 districts · Show districts

Al-Waziriyah, North Prince Fawaz, South Prince Fawaz, Prince Abdulmajeed, Al-Adl, Al-Fadl, Al-Mahjar, Al-Ajawid, Kilo 14, Al-Faruq, Al-Huda, As-Sanabil, Ash-Shifa, Al-Jawharah, At-Tadamun, As-Sururiyah, As-Sarawat, Al-Qawzain, At-Taawun, Al-Khumrah, Al-Karamah, Al-Fudaylah, Al-Qurainiyah, Ad-Dahiyah, Ar-Rahmah, Al-Barakah, Al-Masrah, Ar-Rabiyah, Al-Mustaqbal, As-Sahl

New Jeddah Municipality

≈ 30–50 min
5 districts · Show districts

Ar-Rawdah, As-Salamah, Az-Zahra, Al-Khalidiyah, Ash-Shati

Obhur Municipality

≈ 35–60 min
7 districts · Show districts

An-Naeem, An-Nahdah, Al-Muhammadiyah, Al-Basatin, Al-Murjan, Al-Asalah, South Obhur

Dhahban Municipality

≈ 50–90 min
20 districts · Show districts

North Obhur, Salman Bay, As-Sawari, Az-Zumurrud, Al-Yaqut, Al-Lulu, Al-Firdaws, Ash-Shira, Al-Amwaj, Ar-Riyadh, Taybah, Al-Fanar, Al-Buhayrat, Al-Manarat, An-Nur, Al-Muruj, Al-Khalij, An-Najmah, Az-Zuhur, Dhahban

Thuwal Municipality

≈ 90–120 min
9 districts · Show districts

Thuwal, Al-Kanadirah, Al-Bahharah, As-Sawalhah, Al-Amir, Abu Zayd, Az-Zanabiqah, As-Sarahin, Jawharat Thuwal

Estimated driving times from the lab on normal days; they can be longer during Ramadan and the Hajj season.

In Short

Chemical analysis measures pH, sulfates, chlorides, and total dissolved salts (TDS) in soil, water, and aggregate to determine how aggressive they are toward concrete and steel. Per SBC 303 sulfate classification: below 0.2% is non-aggressive, above 0.5% is highly aggressive and requires sulfate-resistant cement.

Why Structurally "Fine" Soil Can Chemically Destroy Your Concrete

Bearing capacity isn't the only thing you need to know about a site's soil. Soil with excellent bearing capacity can still be rich in sulfates or chlorides — triggering a slow chemical reaction with cement and steel from day one. The result: early foundation deterioration within a few years, even when the structural design was perfectly sound.

The same logic applies to mixing water used in concrete production — non-compliant water raises the salt content inside the mix itself and accelerates rebar corrosion from within. TECHNO Soil Lab analyzes soil, water, and aggregate in the same visit, particularly relevant in coastal areas or near brackish groundwater.

Aggressiveness detected before selecting the right cement type
Verification of mixing water suitability before it's used in concrete
A clear classification (non-aggressive / moderate / severe) based on real numbers
Protects the foundation investment long-term instead of treating corrosion symptoms later

Standards Governing Chemical Analysis

Fixed thresholds separate safe soil from aggressive soil.

SBC 303 / BS 8500

Soil aggressiveness classification by sulfate content: 0.2% lower threshold, 0.5% severe threshold

ASTM D516 / D512 / D4972

Sulfate, chloride, and pH analysis for water and soil

ASTM C114

Chemical analysis of aggregate (pH, chlorides, sulfates, TDS)

ASTM C94 / BS EN 1008

Requirements for mixing water used in concrete production

From Sample to Aggressiveness Classification

3 steps — a clear numeric result at the end.

1

1. Sample Collection

Soil, water, or aggregate sample collected on site, with depth and exact location documented for soil samples.

2

2. Lab Analysis

pH, sulfates, chlorides, and total dissolved salts (TDS) measured per the applicable standard.

3

3. Aggressiveness Classification

Results are compared against SBC 303 thresholds to determine classification and recommend cement type or required treatment.

Included Tests

11 documented tests under the listed standards

Chemical analysis — Water & Soil (pH, Chlorides, Sulfates, TDS)

التحليل الكيميائي للمياه والتربة (pH، كلوريدات، كبريتات، TDS)

ASTM D516 / D512 / D4972

Unit: sample

Chemical analysis — Aggregate (pH, Chlorides, Sulfates, TDS)

التحليل الكيميائي للركام (pH، كلوريدات، كبريتات، TDS)

ASTM C114

Unit: sample

Turbidity Measurement

قياس العكارة (Turbidity)

ASTM D1889

Unit: NTU

Total Hardness

العسرة الكلية (Total Hardness)

ASTM D1126

Unit: mg/L CaCO₃

Calcium

الكالسيوم (Calcium)

ASTM D511

Unit: mg/L

Magnesium

المغنيسيوم (Magnesium)

ASTM D511

Unit: mg/L

Electrical Conductivity (EC)

الموصلية الكهربائية (EC)

Unit: µS/cm

Alkalinity

القلوية (Alkalinity)

Unit: mg/L CaCO₃

Free Residual Chlorine

الكلور الحر المتبقي (Free Chlorine)

Unit: mg/L

Iron

الحديد (Iron)

Unit: mg/L

Manganese

المنغنيز (Manganese)

Unit: mg/L

Equipment used for this service

Why Choose Us

Why TECHNO Soil Lab?

11
Documented Tests

MODON — documented approval

15+
Years Experience

Accumulated technical experience in testing & engineering consultancy

5
Cities Served

Head office in Makkah, with equipped field teams in all five cities

The complete Chemical Analysis guide

Test selection by project type, the pre-contract checklist, what drives the quote and what the report contains — on the main service page.

Read the full guide

Related Reading

Common Questions

FAQ About Chemical Analysis

On normal days, listed coverage windows start at 5–25 minutes for the nearest group and extend to 90–120 minutes for Thuwal. Timing is an estimate by group and may change with traffic, entry clearance, and site readiness.

Need Chemical Analysis Services?

Our specialized team is ready to mobilize to your site anywhere in the Kingdom.