Laboratory Service

Aggregate Testing Laboratory: Gradation & Density in Riyadh

Fine and coarse aggregate testing for gradation, relative density, absorption, bulk density, abrasion, and soundness by intended use and project specification.

Aggregate Testing Laboratory: Gradation & Density

Aggregate Testing in Riyadh

Riyadh projects use aggregate for tower and housing concrete, pavement mixes, and base materials in industrial works. A supplier name does not establish that every delivery has identical properties, while dust or size segregation can undermine a sample. The stockpile, lot, application, and represented quantity must be defined before collection.

Properties selected by function

Testing may cover sieve analysis, fines, specific gravity, absorption, and unit weight. Concrete or pavement specifications may also require Los Angeles abrasion, sulfate soundness, clay lumps, or friable particles. Packages differ for fine aggregate, coarse aggregate, and base material, with results reviewed against ASTM, SASO, and project documents.

From eastern yards to industry

Sampling can be arranged in As-Sulay, Al-Mashail, Al-Qadisiyah, Badr, Al-Masani, and Second Industrial City. On normal days, our Riyadh field team typically reaches the nearest eastern group within 0–15 minutes; the southern window extends to 30–60 minutes. Gate readiness and pile access can alter collection time.

  • Separate each source, size, and delivery.
  • State the quantity represented and final application.
  • Expose more than one suitable stockpile face.
  • Record moisture and visible segregation during collection.

The field quantity is reduced while limiting loss of fines or particle separation. A durable code remains with every container through the agreed laboratory workflow, supporting traceability for work across Riyadh Region.

Areas We Cover in Riyadh

Our Riyadh field team covers 167 districts across six coverage sectors. Listed times are typical on normal days and may vary with traffic and site readiness.

East Riyadh — nearest districts

≈ 0–15 min
6 districts · Show districts

An-Nadwah, Al-Muayzilah, An-Nazim, Ar-Rimayah, Al-Janadriyah, Al-Qadisiyah

East Riyadh

≈ 15–30 min
49 districts · Show districts

Qurtubah, Al-Munsiyah, Ar-Rimal, Ishbiliyah, Al-Yarmuk, An-Nahdah, Al-Khalij, Al-mlk fysl, Al-Hamra, Ghirnata, Ash-Shuhada, Al-Quds, Ar-Rawdah, Al-Andalus, Al-Manar, Ar-Rayyan, East An-Naseem, West An-Naseem, As-Salam, Ar-Rawabi, As-Saadah, Al-Jazirah, Al-Fayha, As-Sulay, Al-Manakh, Ad-Difa, An-Nur, Al-Mashail, Al-Iskan, Al-Bariyah, Hit, Khashm Al-An, Al-Murjan, Al-Wisam, Al-Bayan, Ar-Rihab, Az-Zahir, At-Tadamun, Al-Mashriq, An-Nukhbah, Al-Ula, Ash-Shulah, Az-Zuhur, Ar-Risalah, Al-Majd, Ad-Danah, Ar-Rayah, Al-Fursan, As-Sahab

Central Riyadh

≈ 20–40 min
30 districts · Show districts

Al-Malaz, Al-Murabba, Al-Batha, Ad-Dirah, Al-Amal, As-Salihiyah, Al-Oud, Al-Wizarat, Ad-Dubbat, Jarir, Ar-Rabwah, Az-Zahra, Al-Faysaliyah, Al-Futah, Al-Wisham, An-Namudhajiyah, An-Nasiriyah, Al-Murqab, Ghubairah, Manfuhah, New Manfuhah, Al-Yamamah, Utayqah, Al-Mansurah, Al-Khalidiyah, Al-Jarradiyah, Thulaim, Jabrah, Skirinah, Ar-Rafiah

North Riyadh

≈ 30–55 min
34 districts · Show districts

As-Sahafah, Al-Aqiq, Hittin, Al-Malqa, Al-Yasmin, An-Narjis, Al-Arid, Al-Qirawan, Ar-Rabi, An-Nada, An-Nafl, Al-Ghadir, Al-Wadi, Al-Falah, Banban, King Fahd, King Abdullah, Al-Muruj, Al-Masif, An-Nuzhah, Al-Izdihar, At-Taawun, Al-Mursalat, Al-Mughrizat, Al-Wahah, Ar-Rahmaniyah, Al-Muhammadiyah, An-Nakhil, Salah Ad-Din, North Al-Maathar, Al-Wurud, As-Sulaymaniyah, Al-Olaya, King Abdulaziz

West Riyadh

≈ 30–55 min
30 districts · Show districts

Tuwaiq, Al-Mahdiyah, Dhahrat Laban, Laban, Irqah, Ar-Raid, East Umm Al-Hamam, West Umm Al-Hamam, Al-Khuzama, As-Safarat, Al-Maathar, Al-Uraija, Central Al-Uraija, West Al-Uraija, As-Suwaidi, West As-Suwaidi, Shubra, Al-Badiah, Dhahrat Al-Badiah, Sultanah, Az-Zahrah, Al-Hazm, Namar, Dahiyat Namar, Dirab, Siyah, Al-Fakhriyah, Ulayishah, Ash-Sharafiyah, Al-Huda

South Riyadh

≈ 30–60 min
18 districts · Show districts

Ash-Shifa, Badr, Ukaz, Uhud, Al-Marwah, Al-Aziziyah, Ad-Dar Al-Bayda, Taybah, Al-Hair, Uraidh, Al-Masani, Al-Misfat, Second Industrial City, Umm Ash-Shaal, Al-Ghannamiyah, Al-Amajiyah, Al-Mansuriyah, West Ad-Dar Al-Bayda

Estimated driving times from the lab on normal days; they can be longer during Ramadan and the Hajj season.

In Short

Aggregate testing evaluates a representative fine- or coarse-aggregate sample for its intended concrete, asphalt, or road-layer use. Scope can include gradation, fines, relative density and absorption, bulk density, abrasion, and soundness. Results are compared with the project grading envelope and limits; one package or limit does not fit every use.

Fine and Coarse Aggregate Testing Laboratory

Aggregate covers materials that differ by source, size, and use. Sand is not prepared or interpreted like gravel, and concrete aggregate may have requirements different from asphalt or base-course aggregate. A test request therefore begins with source, nominal size, intended use, and required specification.

Machine precision cannot rescue an unrepresentative sample. Particles can segregate during handling, and quarry faces or supplier stockpiles can change. Sampling and reduction should follow an appropriate plan while identity remains tied to the batch. The report describes the tested sample; supplier or stockpile representation depends on how and how often it was sampled.

Separate fine, coarse, and different-source aggregate samples
Compare particle-size distribution with the project grading envelope
Report relative density, absorption, and bulk density as distinct properties
Link abrasion or soundness results to the correct use and specification limits

Aggregate Testing Scope for Concrete, Asphalt and Roads

Tests follow the project question instead of one list being applied to every sample.

Gradation and Physical Properties

Tests describing size distribution, mass, volume, and water absorption.

Sieve analysis and aggregate gradation
Material finer than the 75-μm sieve by washing where requested
Relative density and absorption for coarse or fine aggregate
Bulk density and voids where included in scope

Durability, Deleterious Materials and Classification

Tests selected according to use, exposure, and material source.

Los Angeles abrasion for gradings covered by the method
Sodium- or magnesium-sulfate soundness where specified
Clay lumps, friable particles, or specified deleterious materials
Petrographic examination where rock and component characterization is needed

Common Aggregate Testing Standards

The method, edition, and project limits are confirmed before any conformity evaluation.

ASTM C136/C136M

Sieve analysis of fine and coarse aggregates

ASTM C117

Material finer than the 75-μm sieve by washing

ASTM C127 / C128

Relative density and absorption of coarse and fine aggregate

ASTM C29/C29M

Bulk density and voids in aggregate

ASTM C131/C131M

Abrasion and impact of small-size coarse aggregate in the Los Angeles machine

ASTM C88

Aggregate soundness using sodium sulfate or magnesium sulfate

ASTM C142/C142M

Clay lumps and friable particles

ASTM C295/C295M

Petrographic examination of aggregates for concrete

From Aggregate Sample to Gradation Curve and Report

Source identity and sample reduction are part of result quality.

1

1. Define Source and Use

We collect aggregate type, source, batch, nominal size, intended use, specification, and requested tests.

2

2. Sample and Reduce

A representative sample is selected and reduced to test portions while limiting segregation and preserving identity.

3

3. Condition and Test

The sample is conditioned under the method before the specified gradation, density, absorption, or durability tests.

4

4. Report and Compare

The report presents values, curve, method, and supplied use limits, highlighting items needing review.

Included Tests

8 field and laboratory tests available by project scope

Standard aggregate sampling

أخذ عينة من الركام

Unit: sample

Sieve Analysis

التدرج الحبيبي

ASTM C136

Unit: sample

Los Angeles Abrasion

مقاومة التآكل — لوس أنجلوس

ASTM C131

Unit: sample

Solar Reflectance Index (SRI)

مؤشر الانعكاس الشمسي (SRI)

ASTM C1549

Unit: sample

Clay Lumps & Friable Particles

نسبة المواد المفتتة (كتل طينية)

ASTM C142

Unit: sample

Magnesium Sulfate Soundness

مقاومة كبريتات المغنسيوم

ASTM C88

Unit: sample

Petrographic Classification

المكونات المعدنية (Petrographic)

ASTM C295 / C295M

Unit: sample

Specific Gravity & Absorption

الوزن النوعي ودرجة الامتصاص

ASTM C127 / C128

Unit: sample

Equipment used for this service

Why Choose Us

Why TECHNO Soil Lab?

8
Available Tests

Field and laboratory tests selected to match the project scope

15+
Years Experience

Accumulated technical experience in testing & engineering consultancy

5
Cities Served

Head office in Makkah, with equipped field teams in all five cities

The complete Aggregate Testing Laboratory: Gradation & Density guide

Test selection by project type, the pre-contract checklist, what drives the quote and what the report contains — on the main service page.

Read the full guide

Related Reading

Common Questions

FAQ About Aggregate Testing Laboratory: Gradation & Density

On normal days, the listed window runs from 0–15 minutes for the nearest eastern districts to 30–60 minutes for southern material yards. These are coverage-group estimates and can change with traffic, gate clearance, and work-point readiness.

Other Services You May Need

Explore the rest of our accredited engineering tests in one place

Need Aggregate Testing Laboratory: Gradation & Density Services?

Our specialized team is ready to mobilize to your site anywhere in the Kingdom.