Laboratory Mixture Samples
Testing mix components or production samples against the target mixture.
Asphalt mixture and pavement testing covering Marshall, binder content, gradation, Gmm, cores, thickness, density, and compaction to project specifications.

Riyadh pavements serve contrasting conditions: northern and eastern residential growth corridors, busy central streets, and truck routes connected with southern industrial areas. Severe summer heat can make rutting or texture change an investigation topic, but heat alone does not explain a defect. Observations need to be related to mix design, layer, traffic, and construction records.
Production samples may undergo Marshall stability and flow, binder extraction, recovered-aggregate grading, and maximum theoretical specific gravity. Located pavement cores can provide visible thickness and bulk density for compaction against the project reference. Reporting retains lane, chainage, plant, and date, then applies the stated ASTM, SASO, or contract method rather than a generic limit.
Coverage includes Ar-Rimal, Al-Yarmuk, As-Sulay, Tuwaiq, Al-Aqiq, and Second Industrial City. On normal days, our Riyadh field team works within 0–15 minutes for the nearest eastern group, while the southern sector extends to 30–60 minutes. Lane permits or ongoing paving can change dispatch.
Before coring, identify direction, lane, station, and layer, and provide the JMF and density reference. Approve cutting points, traffic protection, and hole reinstatement. For rutting or cracking investigations, record the feature and its dimensions before cutting so each specimen addresses the technical question. The same discipline applies across Riyadh Region.
Our Riyadh field team covers 167 districts across six coverage sectors. Listed times are typical on normal days and may vary with traffic and site readiness.
An-Nadwah, Al-Muayzilah, An-Nazim, Ar-Rimayah, Al-Janadriyah, Al-Qadisiyah
Qurtubah, Al-Munsiyah, Ar-Rimal, Ishbiliyah, Al-Yarmuk, An-Nahdah, Al-Khalij, Al-mlk fysl, Al-Hamra, Ghirnata, Ash-Shuhada, Al-Quds, Ar-Rawdah, Al-Andalus, Al-Manar, Ar-Rayyan, East An-Naseem, West An-Naseem, As-Salam, Ar-Rawabi, As-Saadah, Al-Jazirah, Al-Fayha, As-Sulay, Al-Manakh, Ad-Difa, An-Nur, Al-Mashail, Al-Iskan, Al-Bariyah, Hit, Khashm Al-An, Al-Murjan, Al-Wisam, Al-Bayan, Ar-Rihab, Az-Zahir, At-Tadamun, Al-Mashriq, An-Nukhbah, Al-Ula, Ash-Shulah, Az-Zuhur, Ar-Risalah, Al-Majd, Ad-Danah, Ar-Rayah, Al-Fursan, As-Sahab
Al-Malaz, Al-Murabba, Al-Batha, Ad-Dirah, Al-Amal, As-Salihiyah, Al-Oud, Al-Wizarat, Ad-Dubbat, Jarir, Ar-Rabwah, Az-Zahra, Al-Faysaliyah, Al-Futah, Al-Wisham, An-Namudhajiyah, An-Nasiriyah, Al-Murqab, Ghubairah, Manfuhah, New Manfuhah, Al-Yamamah, Utayqah, Al-Mansurah, Al-Khalidiyah, Al-Jarradiyah, Thulaim, Jabrah, Skirinah, Ar-Rafiah
As-Sahafah, Al-Aqiq, Hittin, Al-Malqa, Al-Yasmin, An-Narjis, Al-Arid, Al-Qirawan, Ar-Rabi, An-Nada, An-Nafl, Al-Ghadir, Al-Wadi, Al-Falah, Banban, King Fahd, King Abdullah, Al-Muruj, Al-Masif, An-Nuzhah, Al-Izdihar, At-Taawun, Al-Mursalat, Al-Mughrizat, Al-Wahah, Ar-Rahmaniyah, Al-Muhammadiyah, An-Nakhil, Salah Ad-Din, North Al-Maathar, Al-Wurud, As-Sulaymaniyah, Al-Olaya, King Abdulaziz
Tuwaiq, Al-Mahdiyah, Dhahrat Laban, Laban, Irqah, Ar-Raid, East Umm Al-Hamam, West Umm Al-Hamam, Al-Khuzama, As-Safarat, Al-Maathar, Al-Uraija, Central Al-Uraija, West Al-Uraija, As-Suwaidi, West As-Suwaidi, Shubra, Al-Badiah, Dhahrat Al-Badiah, Sultanah, Az-Zahrah, Al-Hazm, Namar, Dahiyat Namar, Dirab, Siyah, Al-Fakhriyah, Ulayishah, Ash-Sharafiyah, Al-Huda
Ash-Shifa, Badr, Ukaz, Uhud, Al-Marwah, Al-Aziziyah, Ad-Dar Al-Bayda, Taybah, Al-Hair, Uraidh, Al-Masani, Al-Misfat, Second Industrial City, Umm Ash-Shaal, Al-Ghannamiyah, Al-Amajiyah, Al-Mansuriyah, West Ad-Dar Al-Bayda
Estimated driving times from the lab on normal days; they can be longer during Ramadan and the Hajj season.
In Short
Asphalt testing is a field and laboratory service for asphalt mixtures and paved layers; it is not asphalt supply or paving-equipment rental. Scope can include Marshall, bitumen content and gradation, maximum theoretical specific gravity, asphalt cores, thickness, density, and compaction. Results are compared with the project specification and approved JMF.
Asphalt quality control connects three stages: source materials, the produced mixture, and the layer after placement and compaction. The JMF records the target composition and limits. Production samples and cores then show whether the tested mixture and paved layer align with the requirements supplied to the laboratory.
Asphalt density alone is not enough to evaluate paving. The reference density, calculation method, core location, layer thickness, and mixture results all matter. The laboratory reports measurements and comparisons, while the authorized project party determines acceptance or corrective action under the contract and specification.
The test package follows the project stage and the question the results must answer.
Testing mix components or production samples against the target mixture.
Sampling or coring with location records, followed by paved-layer measurements.
The governing method, limits, and frequency come from the approved project documents.
Marshall specimen preparation and stability and flow testing
Quantitative extraction of asphalt binder from mixtures
Sieve analysis of extracted aggregate
Maximum theoretical specific gravity of asphalt mixtures (Gmm)
Sampling compacted asphalt mixtures
Bulk specific gravity of non-absorptive compacted specimens
Thickness measurement of compacted asphalt specimens
Every sample should trace to the mix, layer, location, and comparison reference.
1. Review Scope and References
We collect the project specification, JMF, layer type, sampling locations or frequency, and required tests.
2. Sample and Record
The mixture sample or core is identified by date, location, orientation, and layer, with condition recorded on receipt.
3. Test and Calculate
Agreed tests are performed and density or compaction is calculated using the specified reference rather than an assumed generic value.
4. Report and Compare
The report presents methods, results, location data, and the supplied JMF or specification limits, highlighting items needing review.
10 field and laboratory tests available by project scope
Prime Coat Spray Rate (MC1)
معدل رش الطبقة التشريبية (MC1)
Unit: test
Tack Coat Spray Rate (RC2)
معدل رش الطبقة اللاصقة (RC2)
Unit: test
Bitumen Content in asphalt mix
نسبة البيتومين في الخلطة الإسفلتية
Unit: sample
Gradation of asphalt sample
التدرج الحبيبي للأسفلت
Unit: sample
Maximum Theoretical Specific Gravity (Gmm)
أقصى كثافة نوعية نظرية (Gmm)
Unit: sample
Marshall Stability & Flow (6 molds)
الثبات والفاقد — مارشال (6 قوالب)
Unit: sample
Flash Point (bitumen)
نقطة التوهج (البيتومين)
Unit: sample
Viscosity Coefficient (bitumen)
معامل اللزوجة (البيتومين)
Unit: sample
JMF Quality Control (Coarse Agg, Fine Agg, Filler, MC1)
مراقبة جودة مكونات الخلطة (JMF)
Unit: test
Asphalt Core Sampling (with report)
كور أسفلتي (مع تقرير)
Unit: sample
Field and laboratory tests selected to match the project scope
Accumulated technical experience in testing & engineering consultancy
Head office in Makkah, with equipped field teams in all five cities
Test selection by project type, the pre-contract checklist, what drives the quote and what the report contains — on the main service page.
Read the full guideOn normal days, the listed window runs from 0–15 minutes for the nearest eastern districts to 30–60 minutes for southern road work. These are coverage-group estimates and can change with traffic, gate clearance, and work-point readiness.
Explore the rest of our accredited engineering tests in one place

Soil
A soil testing laboratory covering pre-construction boreholes, in-situ testing, sampling, laboratory analysis, and geotechnical reporting according to each project's scope.

Concrete
Fresh and hardened concrete testing covering slump, temperature, specimens, compressive strength, concrete cores, and non-destructive methods to project specifications.

Aggregate
Fine and coarse aggregate testing for gradation, relative density, absorption, bulk density, abrasion, and soundness by intended use and project specification.

Rebar
Rebar batch testing covering yield, tensile strength, elongation, bend, mass per metre, and chemical composition under the specified grade and project standard.

Chemical
Book a water or soil sample and get results within days — turbidity, total hardness, calcium, magnesium, pH, sulfates and chlorides, for drinking, irrigation, sewage, well, hotel and farm water.

Blocks
Testing for cement blocks, interlock pavers, and curbstones covering dimensions, compressive strength, water absorption, and density by product specification.
Our specialized team is ready to mobilize to your site anywhere in the Kingdom.