Laboratory Service

Rebar Testing Laboratory: Tensile & Bend in Riyadh

Rebar batch testing covering yield, tensile strength, elongation, bend, mass per metre, and chemical composition under the specified grade and project standard.

Rebar Testing Laboratory: Tensile & Bend

Rebar Testing in Riyadh

Construction across Riyadh brings multiple steel deliveries to northern and eastern developments and southern industrial work. The first challenge is not operating a tensile machine; it is keeping manufacturer, grade, size, and heat identities separate. A bar that loses its batch link cannot reliably represent the associated consignment.

From mill record to specimen

Visible markings and the mill certificate are reviewed before cutting, and the request defines specimen length and preparation. Scope may cover yield, tensile strength, elongation, bend or rebend behaviour, mass, dimensions, or chemistry when specified. The stated ASTM or SASO method applies. Testing an installed anchor or fixing is a different system assessment and should not be merged with a steel-specimen result.

Collections across growth areas

Pickups can be arranged in Al-Munsiyah, Qurtubah, An-Narjis, Al-Malqa, As-Sulay, and Second Industrial City. On normal days, our Riyadh field team usually covers the nearest eastern group within 0–15 minutes, with southern sites listed at 30–60 minutes. Entry clearance and a safe cutting point are required.

Separate lots under the sampling plan, record size, grade, and heat on an individual tag, and photograph markings before they are removed. Secure pieces so codes cannot be exchanged in transit. The report describes tested specimens; consignment acceptance remains with the authorized project process for Riyadh Region.

Areas We Cover in Riyadh

Our Riyadh field team covers 167 districts across six coverage sectors. Listed times are typical on normal days and may vary with traffic and site readiness.

East Riyadh — nearest districts

≈ 0–15 min
6 districts · Show districts

An-Nadwah, Al-Muayzilah, An-Nazim, Ar-Rimayah, Al-Janadriyah, Al-Qadisiyah

East Riyadh

≈ 15–30 min
49 districts · Show districts

Qurtubah, Al-Munsiyah, Ar-Rimal, Ishbiliyah, Al-Yarmuk, An-Nahdah, Al-Khalij, Al-mlk fysl, Al-Hamra, Ghirnata, Ash-Shuhada, Al-Quds, Ar-Rawdah, Al-Andalus, Al-Manar, Ar-Rayyan, East An-Naseem, West An-Naseem, As-Salam, Ar-Rawabi, As-Saadah, Al-Jazirah, Al-Fayha, As-Sulay, Al-Manakh, Ad-Difa, An-Nur, Al-Mashail, Al-Iskan, Al-Bariyah, Hit, Khashm Al-An, Al-Murjan, Al-Wisam, Al-Bayan, Ar-Rihab, Az-Zahir, At-Tadamun, Al-Mashriq, An-Nukhbah, Al-Ula, Ash-Shulah, Az-Zuhur, Ar-Risalah, Al-Majd, Ad-Danah, Ar-Rayah, Al-Fursan, As-Sahab

Central Riyadh

≈ 20–40 min
30 districts · Show districts

Al-Malaz, Al-Murabba, Al-Batha, Ad-Dirah, Al-Amal, As-Salihiyah, Al-Oud, Al-Wizarat, Ad-Dubbat, Jarir, Ar-Rabwah, Az-Zahra, Al-Faysaliyah, Al-Futah, Al-Wisham, An-Namudhajiyah, An-Nasiriyah, Al-Murqab, Ghubairah, Manfuhah, New Manfuhah, Al-Yamamah, Utayqah, Al-Mansurah, Al-Khalidiyah, Al-Jarradiyah, Thulaim, Jabrah, Skirinah, Ar-Rafiah

North Riyadh

≈ 30–55 min
34 districts · Show districts

As-Sahafah, Al-Aqiq, Hittin, Al-Malqa, Al-Yasmin, An-Narjis, Al-Arid, Al-Qirawan, Ar-Rabi, An-Nada, An-Nafl, Al-Ghadir, Al-Wadi, Al-Falah, Banban, King Fahd, King Abdullah, Al-Muruj, Al-Masif, An-Nuzhah, Al-Izdihar, At-Taawun, Al-Mursalat, Al-Mughrizat, Al-Wahah, Ar-Rahmaniyah, Al-Muhammadiyah, An-Nakhil, Salah Ad-Din, North Al-Maathar, Al-Wurud, As-Sulaymaniyah, Al-Olaya, King Abdulaziz

West Riyadh

≈ 30–55 min
30 districts · Show districts

Tuwaiq, Al-Mahdiyah, Dhahrat Laban, Laban, Irqah, Ar-Raid, East Umm Al-Hamam, West Umm Al-Hamam, Al-Khuzama, As-Safarat, Al-Maathar, Al-Uraija, Central Al-Uraija, West Al-Uraija, As-Suwaidi, West As-Suwaidi, Shubra, Al-Badiah, Dhahrat Al-Badiah, Sultanah, Az-Zahrah, Al-Hazm, Namar, Dahiyat Namar, Dirab, Siyah, Al-Fakhriyah, Ulayishah, Ash-Sharafiyah, Al-Huda

South Riyadh

≈ 30–60 min
18 districts · Show districts

Ash-Shifa, Badr, Ukaz, Uhud, Al-Marwah, Al-Aziziyah, Ad-Dar Al-Bayda, Taybah, Al-Hair, Uraidh, Al-Masani, Al-Misfat, Second Industrial City, Umm Ash-Shaal, Al-Ghannamiyah, Al-Amajiyah, Al-Mansuriyah, West Ad-Dar Al-Bayda

Estimated driving times from the lab on normal days; they can be longer during Ramadan and the Hajj season.

In Short

Rebar testing evaluates identified batch specimens for properties such as yield strength, tensile strength, elongation, bend performance, and mass per metre, with chemical analysis where requested. Bar size, grade, markings, manufacturer, and heat or batch should be recorded before results are compared with the project-adopted specification.

Rebar Testing Laboratory for Batch Conformity

Visible diameter or supplier name alone does not establish rebar properties. A test request needs specimens tied to an identified batch, bar markings, grade, and nominal size, followed by the appropriate mechanical or chemical measurements. This chain links the reported number to material delivered to the project.

A tensile test produces several values rather than one verdict: yield, ultimate tensile strength, and elongation, with additional ratios where the specification requires them. Bend testing evaluates a specimen around a specified mandrel. Mass per metre and chemical composition answer different questions and do not replace mechanical testing.

Trace each specimen to size, grade, markings, and available batch data
Report yield, tensile strength, and elongation as separate reviewable values
Measure mass per metre against the specified method and tolerances
Separate chemical-composition results from any weldability evaluation

Mechanical and Chemical Rebar Testing Scope

The package follows the product specification and project request rather than a fixed list for every delivery.

Mechanical and Physical Checks

Tests related to bar behavior, dimensions, or mass.

Yield strength and ultimate tensile strength
Elongation after fracture and the applied gauge length
Bend or rebend testing where required by the specification
Mass per metre and available size or dimensional data

Chemical Composition and Fasteners

A separate scope defining measured elements and product type.

Chemical composition by the agreed analytical method
Carbon-equivalent calculation only where the specification defines the formula and elements
Bolt or anchor-bolt tests under the product grade and specification
Field pull-out testing as a scope distinct from rebar tensile testing

Common Rebar Testing and Conformity References

Product specifications and test methods serve different roles; the required edition is confirmed before testing.

ASTM A615/A615M

Product specification for deformed and plain carbon-steel reinforcing bars

ASTM A706/A706M

Product specification for low-alloy reinforcing bars where selected

ASTM A370

Mechanical testing methods and definitions for steel products

ISO 15630-1

Test methods for reinforcing bars, rods, and wire

ASTM E415

Optical-emission analysis of carbon and low-alloy steel where method applicability is confirmed

SASO / project specification

Grade, limits, and sampling plan adopted by the project

From Rebar Sampling to the Conformity Report

Specimen identity should remain traceable from delivery to the test machine.

1

1. Review Delivery and Requirement

We collect size, grade, markings, manufacturer, heat or batch data, specification, and requested tests.

2

2. Sample and Identify

Specimens are selected under the project plan or received with source, length, condition, and prior preparation recorded.

3

3. Prepare and Test

The specimen is prepared and measured before tensile, bend, mass, or chemical testing under the work-order scope.

4

4. Results and Comparison

The report presents individual values, test method, and supplied specification limits, flagging items requiring an authorized decision.

Included Tests

9 field and laboratory tests available by project scope

Standard rebar sampling

سحب عينات حديد التسليح

Unit: sample

Tensile Stress, Yield Stress & % Elongation

اجهاد الشد والخضوع والاستطالة

ASTM A615 / SASO 2510

Unit: sample

Bend Test

درجة الثني

ASTM A615

Unit: sample

Carbon Chemical Analysis (rebar)

التحليل الكيميائي الكربوني (حديد)

Unit: sample

Tensile Strength (anchor bolts)

قوة الشد للأنكوربولت

ASTM F1554

Unit: sample

Carbon Chemical Analysis (anchor bolts)

التحليل الكيميائي للأنكوربولت

Unit: sample

Bolt Tensile Strength

قوة الشد للمسامير

Unit: sample

Pull Out Test (installation bolts)

قوة الشد لمسامير التزريع (Pull Out)

Unit: test

Galvanization Cover Test

نسبة الجلفنة

Unit: test

Why Choose Us

Why TECHNO Soil Lab?

9
Available Tests

Field and laboratory tests selected to match the project scope

15+
Years Experience

Accumulated technical experience in testing & engineering consultancy

5
Cities Served

Head office in Makkah, with equipped field teams in all five cities

The complete Rebar Testing Laboratory: Tensile & Bend guide

Test selection by project type, the pre-contract checklist, what drives the quote and what the report contains — on the main service page.

Read the full guide

Projects Where We Ran This Service

Related Reading

Common Questions

FAQ About Rebar Testing Laboratory: Tensile & Bend

On normal days, the listed window runs from 0–15 minutes for the nearest eastern districts to 30–60 minutes for southern collection sites. These are coverage-group estimates and can change with traffic, gate clearance, and work-point readiness.

Other Services You May Need

Explore the rest of our accredited engineering tests in one place

Need Rebar Testing Laboratory: Tensile & Bend Services?

Our specialized team is ready to mobilize to your site anywhere in the Kingdom.