Chemical Analysis in Riyadh
Book a water or soil sample and get results within days — turbidity, total hardness, calcium, magnesium, pH, sulfates and chlorides, for drinking, irrigation, sewage, well, hotel and farm water.

Chemical Analysis of Soil and Water in Riyadh
Soil and water chemistry is not uniform across Riyadh simply because the climate is dry. Salt conditions can differ between silty and sandy layers, and water encountered in an excavation is not the same source as construction water. The request should first identify whether it concerns soil, groundwater, mixing water, or fill.
Map the sample, not just the district
Scope may include pH, sulfates, chlorides, TDS, or conductivity, plus parameters stated in project documents. Collection point, depth, time, and medium must remain attached to the result. The designer or consultant supplies the required ASTM or SASO method and comparison basis; a value should not be generalized to a neighbouring plot.
Collection points across the plateau
Coverage includes Al-Qadisiyah and Ar-Rimal in the east, Al-Arid and An-Narjis in the north, Tuwaiq in the west, and Al-Misfat in the south. On normal days, our Riyadh field team typically reaches the nearest eastern districts within 0–15 minutes, while the southern sector is listed at 30–60 minutes.
- Define analytes before selecting containers.
- Assign separate codes to every depth and source.
- Record preservation or filtration required by the method.
- Agree transport before opening the sampling point.
Never combine water from separate locations. Samples follow the agreed laboratory workflow, and the result is reviewed against its intended use for projects in Riyadh Region.
Areas We Cover in Riyadh
Our Riyadh field team covers 167 districts across six coverage sectors. Listed times are typical on normal days and may vary with traffic and site readiness.
East Riyadh — nearest districts
≈ 0–15 min6 districts · Show districts
An-Nadwah, Al-Muayzilah, An-Nazim, Ar-Rimayah, Al-Janadriyah, Al-Qadisiyah
East Riyadh
≈ 15–30 min49 districts · Show districts
Qurtubah, Al-Munsiyah, Ar-Rimal, Ishbiliyah, Al-Yarmuk, An-Nahdah, Al-Khalij, Al-mlk fysl, Al-Hamra, Ghirnata, Ash-Shuhada, Al-Quds, Ar-Rawdah, Al-Andalus, Al-Manar, Ar-Rayyan, East An-Naseem, West An-Naseem, As-Salam, Ar-Rawabi, As-Saadah, Al-Jazirah, Al-Fayha, As-Sulay, Al-Manakh, Ad-Difa, An-Nur, Al-Mashail, Al-Iskan, Al-Bariyah, Hit, Khashm Al-An, Al-Murjan, Al-Wisam, Al-Bayan, Ar-Rihab, Az-Zahir, At-Tadamun, Al-Mashriq, An-Nukhbah, Al-Ula, Ash-Shulah, Az-Zuhur, Ar-Risalah, Al-Majd, Ad-Danah, Ar-Rayah, Al-Fursan, As-Sahab
Central Riyadh
≈ 20–40 min30 districts · Show districts
Al-Malaz, Al-Murabba, Al-Batha, Ad-Dirah, Al-Amal, As-Salihiyah, Al-Oud, Al-Wizarat, Ad-Dubbat, Jarir, Ar-Rabwah, Az-Zahra, Al-Faysaliyah, Al-Futah, Al-Wisham, An-Namudhajiyah, An-Nasiriyah, Al-Murqab, Ghubairah, Manfuhah, New Manfuhah, Al-Yamamah, Utayqah, Al-Mansurah, Al-Khalidiyah, Al-Jarradiyah, Thulaim, Jabrah, Skirinah, Ar-Rafiah
North Riyadh
≈ 30–55 min34 districts · Show districts
As-Sahafah, Al-Aqiq, Hittin, Al-Malqa, Al-Yasmin, An-Narjis, Al-Arid, Al-Qirawan, Ar-Rabi, An-Nada, An-Nafl, Al-Ghadir, Al-Wadi, Al-Falah, Banban, King Fahd, King Abdullah, Al-Muruj, Al-Masif, An-Nuzhah, Al-Izdihar, At-Taawun, Al-Mursalat, Al-Mughrizat, Al-Wahah, Ar-Rahmaniyah, Al-Muhammadiyah, An-Nakhil, Salah Ad-Din, North Al-Maathar, Al-Wurud, As-Sulaymaniyah, Al-Olaya, King Abdulaziz
West Riyadh
≈ 30–55 min30 districts · Show districts
Tuwaiq, Al-Mahdiyah, Dhahrat Laban, Laban, Irqah, Ar-Raid, East Umm Al-Hamam, West Umm Al-Hamam, Al-Khuzama, As-Safarat, Al-Maathar, Al-Uraija, Central Al-Uraija, West Al-Uraija, As-Suwaidi, West As-Suwaidi, Shubra, Al-Badiah, Dhahrat Al-Badiah, Sultanah, Az-Zahrah, Al-Hazm, Namar, Dahiyat Namar, Dirab, Siyah, Al-Fakhriyah, Ulayishah, Ash-Sharafiyah, Al-Huda
South Riyadh
≈ 30–60 min18 districts · Show districts
Ash-Shifa, Badr, Ukaz, Uhud, Al-Marwah, Al-Aziziyah, Ad-Dar Al-Bayda, Taybah, Al-Hair, Uraidh, Al-Masani, Al-Misfat, Second Industrial City, Umm Ash-Shaal, Al-Ghannamiyah, Al-Amajiyah, Al-Mansuriyah, West Ad-Dar Al-Bayda
Estimated driving times from the lab on normal days; they can be longer during Ramadan and the Hajj season.
In Short
Chemical analysis measures pH, sulfates, chlorides, and total dissolved salts (TDS) in soil, water, and aggregate to determine how aggressive they are toward concrete and steel. Per SBC 303 sulfate classification: below 0.2% is non-aggressive, above 0.5% is highly aggressive and requires sulfate-resistant cement.
Why Structurally "Fine" Soil Can Chemically Destroy Your Concrete
Bearing capacity isn't the only thing you need to know about a site's soil. Soil with excellent bearing capacity can still be rich in sulfates or chlorides — triggering a slow chemical reaction with cement and steel from day one. The result: early foundation deterioration within a few years, even when the structural design was perfectly sound.
The same logic applies to mixing water used in concrete production — non-compliant water raises the salt content inside the mix itself and accelerates rebar corrosion from within. TECHNO Soil Lab analyzes soil, water, and aggregate in the same visit, particularly relevant in coastal areas or near brackish groundwater.
Standards Governing Chemical Analysis
Fixed thresholds separate safe soil from aggressive soil.
Soil aggressiveness classification by sulfate content: 0.2% lower threshold, 0.5% severe threshold
Sulfate, chloride, and pH analysis for water and soil
Chemical analysis of aggregate (pH, chlorides, sulfates, TDS)
Requirements for mixing water used in concrete production
From Sample to Aggressiveness Classification
3 steps — a clear numeric result at the end.
1. Sample Collection
Soil, water, or aggregate sample collected on site, with depth and exact location documented for soil samples.
2. Lab Analysis
pH, sulfates, chlorides, and total dissolved salts (TDS) measured per the applicable standard.
3. Aggressiveness Classification
Results are compared against SBC 303 thresholds to determine classification and recommend cement type or required treatment.
Included Tests
11 documented tests under the listed standards
Chemical analysis — Water & Soil (pH, Chlorides, Sulfates, TDS)
التحليل الكيميائي للمياه والتربة (pH، كلوريدات، كبريتات، TDS)
Unit: sample
Chemical analysis — Aggregate (pH, Chlorides, Sulfates, TDS)
التحليل الكيميائي للركام (pH، كلوريدات، كبريتات، TDS)
Unit: sample
Turbidity Measurement
قياس العكارة (Turbidity)
Unit: NTU
Total Hardness
العسرة الكلية (Total Hardness)
Unit: mg/L CaCO₃
Calcium
الكالسيوم (Calcium)
Unit: mg/L
Magnesium
المغنيسيوم (Magnesium)
Unit: mg/L
Electrical Conductivity (EC)
الموصلية الكهربائية (EC)
Unit: µS/cm
Alkalinity
القلوية (Alkalinity)
Unit: mg/L CaCO₃
Free Residual Chlorine
الكلور الحر المتبقي (Free Chlorine)
Unit: mg/L
Iron
الحديد (Iron)
Unit: mg/L
Manganese
المنغنيز (Manganese)
Unit: mg/L
Equipment used for this service
Why TECHNO Soil Lab?
MODON — documented approval
Accumulated technical experience in testing & engineering consultancy
Head office in Makkah, with equipped field teams in all five cities
The complete Chemical Analysis guide
Test selection by project type, the pre-contract checklist, what drives the quote and what the report contains — on the main service page.
Read the full guideFAQ About Chemical Analysis
On normal days, the listed window runs from 0–15 minutes for the nearest eastern districts to 30–60 minutes for southern sampling points. These are coverage-group estimates and can change with traffic, gate clearance, and work-point readiness.
Other Services You May Need
Explore the rest of our accredited engineering tests in one place

Soil
Soil Testing Laboratory, Boreholes & Site Tests
A soil testing laboratory covering pre-construction boreholes, in-situ testing, sampling, laboratory analysis, and geotechnical reporting according to each project's scope.

Concrete
Concrete Testing Laboratory: Site & Lab Tests
Fresh and hardened concrete testing covering slump, temperature, specimens, compressive strength, concrete cores, and non-destructive methods to project specifications.

Asphalt
Asphalt Testing Laboratory: Density & Compaction
Asphalt mixture and pavement testing covering Marshall, binder content, gradation, Gmm, cores, thickness, density, and compaction to project specifications.

Aggregate
Aggregate Testing Laboratory: Gradation & Density
Fine and coarse aggregate testing for gradation, relative density, absorption, bulk density, abrasion, and soundness by intended use and project specification.

Rebar
Rebar Testing Laboratory: Tensile & Bend
Rebar batch testing covering yield, tensile strength, elongation, bend, mass per metre, and chemical composition under the specified grade and project standard.

Blocks
Block and Interlock Testing Laboratory
Testing for cement blocks, interlock pavers, and curbstones covering dimensions, compressive strength, water absorption, and density by product specification.
Need Chemical Analysis Services?
Our specialized team is ready to mobilize to your site anywhere in the Kingdom.
