Laboratory Service

Rebar Testing Laboratory: Tensile & Bend in Makkah

Rebar batch testing covering yield, tensile strength, elongation, bend, mass per metre, and chemical composition under the specified grade and project standard.

Rebar Testing Laboratory: Tensile & Bend

Rebar Testing in Makkah

A useful rebar result must remain traceable to a defined delivery. Before bars are cut, record the diameter, grade, markings, manufacturer, and heat or batch number, then connect the specimens to the sampling plan and product specification. One unidentified piece cannot represent every delivery on a site.

Mechanical and chemical scope

The requested package may cover yield strength, ultimate tensile strength, elongation after fracture, bend or rebend performance, mass per metre, and available dimensional data. Chemical composition and carbon-equivalent calculation can be added when the governing method defines the required elements and formula. A field anchor pull-out test is a separate service from tensile testing a rebar specimen.

Collection around Makkah

For Makkah (Mecca) projects, TECHNO Soil Lab dispatches from Al-Bay'ah in Ash-Shara'i. Typical normal-day travel is about 20 minutes to Al-Aziziyah, 32 minutes to Al-Utaybiyah, and 35 minutes to South Makkah. Collections can be coordinated in Al-Jami'ah, Ash-Shuhada, or Haret Al-Bab (New), subject to site access. Hajj and Umrah congestion may shift the arrival window.

Keep the nominated batch separate, provide the mill certificate, grade, specification, required tests, and sampling instruction, and confirm who will cut each specimen to the required length. Every piece should carry a durable identifier. Results are compared with the supplied ASTM, SASO, or project limits, while delivery acceptance remains the authorized project's decision.

Areas We Cover in Makkah

Our field teams set out from the lab in Al-Bay'ah, Ash-Shara'i, to all ten sub-municipalities of Makkah (Mecca) — 101 districts under the official names adopted by the Makkah Municipality.

Ash-Shara'i

≈ 12 min

Lab HQ

21 districts · Show districts

Ath-Thaniyah, Zamzam, Uhud, Al-Maqam, Ash-Shara'i, Al-Yamamah, At-Tarwiyah, As-Salam, Ar-Rashidiyah, Al-Kawthar, Al-Mughammis, Ma'ad, Al-Khadra, Al-Bay'ah, Al-Marwah, As-Sanabil, Al-Barakah, Taybah, Al-Fath, Al-Abidiyah, Al-Ji'ranah

Al-Aziziyah

≈ 20 min
10 districts · Show districts

Al-Aziziyah, Al-Jami'ah, Al-Mursalat, Al-Awali, An-Naseem, Al-Husayniyah, Badr, As-Safa, Tuwa, Al-Hudaybiyah

Al-Ma'abidah

≈ 27 min
9 districts · Show districts

Al-Jumayzah, Al-Khansa, Ar-Rawdah, As-Sulaymaniyah, Al-Adl, Al-Ma'abidah, Jabal An-Nur, Wadi Jalil, Ri' Adhakhir

Al-Masfalah

≈ 27 min
7 districts · Show districts

Al-Masfalah, Kudai, Ar-Rusayfah, At-Taqwa, Al-Hindawiyah, Jurhum, Al-Khalidiyah

Ajyad

≈ 30 min
2 districts · Show districts

Ajyad, Al-Hatim

Al-Ghazzah

≈ 30 min
6 districts · Show districts

Rua Al-Haram, Jarwal, Al-Hajun, Al-Biban, At-Taysir, Hunayn

Al-Umrah

≈ 30 min
12 districts · Show districts

An-Nawariyah, Al-Umrah, At-Tan'eem, Al-Buhayrat, Dar As-Salam, Qurtubah, Al-Hamra, Umm Al-Jud, Ash-Shumaysi, Al-Usaylah, Al-Aqabah, Ar-Rawabi

Al-Utaybiyah

≈ 32 min
8 districts · Show districts

Al-Andalus, Al-Utaybiyah, Ash-Shuhada, Az-Zahra, An-Nuzhah, Ad-Diyafah, Az-Zahir, As-Salamah

South Makkah

≈ 35 min
15 districts · Show districts

Haret Al-Bab (New), Ash-Shubaykah (New), Ash-Shamiyah (New), Shi'b Amir (New), Shi'b Ali (New), Al-Judariyah (New), Al-Hajlah (New), Al-Misyal (New), As-Suq As-Saghir (New), Al-Qashashiyah (New), Al-Ghazzah (New), Al-Qararah (New), Al-Mudda'a (New), Al-Falaq (New), An-Naqa (New)

Ash-Shawqiyah

≈ 35 min
11 districts · Show districts

Al-Hijrah, Ash-Shawqiyah, Al-Kakiyah, Al-Ukayshiyah, King Fahd, As-Safwah, Al-Muhammadiyah, Al-Furqan, Al-Basatin, As-Safrah, Batha Quraysh

Estimated driving times from the lab on normal days; they can be longer during Ramadan and the Hajj season.

In Short

Rebar testing evaluates identified batch specimens for properties such as yield strength, tensile strength, elongation, bend performance, and mass per metre, with chemical analysis where requested. Bar size, grade, markings, manufacturer, and heat or batch should be recorded before results are compared with the project-adopted specification.

Rebar Testing Laboratory for Batch Conformity

Visible diameter or supplier name alone does not establish rebar properties. A test request needs specimens tied to an identified batch, bar markings, grade, and nominal size, followed by the appropriate mechanical or chemical measurements. This chain links the reported number to material delivered to the project.

A tensile test produces several values rather than one verdict: yield, ultimate tensile strength, and elongation, with additional ratios where the specification requires them. Bend testing evaluates a specimen around a specified mandrel. Mass per metre and chemical composition answer different questions and do not replace mechanical testing.

Trace each specimen to size, grade, markings, and available batch data
Report yield, tensile strength, and elongation as separate reviewable values
Measure mass per metre against the specified method and tolerances
Separate chemical-composition results from any weldability evaluation

Mechanical and Chemical Rebar Testing Scope

The package follows the product specification and project request rather than a fixed list for every delivery.

Mechanical and Physical Checks

Tests related to bar behavior, dimensions, or mass.

Yield strength and ultimate tensile strength
Elongation after fracture and the applied gauge length
Bend or rebend testing where required by the specification
Mass per metre and available size or dimensional data

Chemical Composition and Fasteners

A separate scope defining measured elements and product type.

Chemical composition by the agreed analytical method
Carbon-equivalent calculation only where the specification defines the formula and elements
Bolt or anchor-bolt tests under the product grade and specification
Field pull-out testing as a scope distinct from rebar tensile testing

Common Rebar Testing and Conformity References

Product specifications and test methods serve different roles; the required edition is confirmed before testing.

ASTM A615/A615M

Product specification for deformed and plain carbon-steel reinforcing bars

ASTM A706/A706M

Product specification for low-alloy reinforcing bars where selected

ASTM A370

Mechanical testing methods and definitions for steel products

ISO 15630-1

Test methods for reinforcing bars, rods, and wire

ASTM E415

Optical-emission analysis of carbon and low-alloy steel where method applicability is confirmed

SASO / project specification

Grade, limits, and sampling plan adopted by the project

From Rebar Sampling to the Conformity Report

Specimen identity should remain traceable from delivery to the test machine.

1

1. Review Delivery and Requirement

We collect size, grade, markings, manufacturer, heat or batch data, specification, and requested tests.

2

2. Sample and Identify

Specimens are selected under the project plan or received with source, length, condition, and prior preparation recorded.

3

3. Prepare and Test

The specimen is prepared and measured before tensile, bend, mass, or chemical testing under the work-order scope.

4

4. Results and Comparison

The report presents individual values, test method, and supplied specification limits, flagging items requiring an authorized decision.

Included Tests

9 field and laboratory tests available by project scope

Standard rebar sampling

سحب عينات حديد التسليح

Unit: sample

Tensile Stress, Yield Stress & % Elongation

اجهاد الشد والخضوع والاستطالة

ASTM A615 / SASO 2510

Unit: sample

Bend Test

درجة الثني

ASTM A615

Unit: sample

Carbon Chemical Analysis (rebar)

التحليل الكيميائي الكربوني (حديد)

Unit: sample

Tensile Strength (anchor bolts)

قوة الشد للأنكوربولت

ASTM F1554

Unit: sample

Carbon Chemical Analysis (anchor bolts)

التحليل الكيميائي للأنكوربولت

Unit: sample

Bolt Tensile Strength

قوة الشد للمسامير

Unit: sample

Pull Out Test (installation bolts)

قوة الشد لمسامير التزريع (Pull Out)

Unit: test

Galvanization Cover Test

نسبة الجلفنة

Unit: test

Why Choose Us

Why TECHNO Soil Lab?

9
Available Tests

Field and laboratory tests selected to match the project scope

15+
Years Experience

Accumulated technical experience in testing & engineering consultancy

5
Cities Served

Head office in Makkah, with equipped field teams in all five cities

The complete Rebar Testing Laboratory: Tensile & Bend guide

Test selection by project type, the pre-contract checklist, what drives the quote and what the report contains — on the main service page.

Read the full guide

Projects Where We Ran This Service

Related Reading

Common Questions

FAQ About Rebar Testing Laboratory: Tensile & Bend

On normal days, typical driving is about 20 minutes to Al-Aziziyah, 32 minutes to Al-Utaybiyah, and 35 minutes to South Makkah from Al-Bay'ah. Hajj, Umrah, or special site-entry controls may change the collection window.

Other Services You May Need

Explore the rest of our accredited engineering tests in one place

Need Rebar Testing Laboratory: Tensile & Bend Services?

Our specialized team is ready to mobilize to your site anywhere in the Kingdom.