Laboratory Mixture Samples
Testing mix components or production samples against the target mixture.
Asphalt mixture and pavement testing covering Marshall, binder content, gradation, Gmm, cores, thickness, density, and compaction to project specifications.

Qassim (Al-Qassim) roads connect separated towns and carry farm and truck traffic through an inland climate with intense summer heat. Rutting, texture loss, or cracking can have several causes, so weather alone is not a diagnosis. Every sample needs a link to its mix, layer, location, construction history, and drainage setting.
Mix work may include Marshall stability and flow, binder extraction, aggregate grading, and maximum theoretical specific gravity. After paving, planned cores can provide visible thickness and bulk density for compaction against the project reference. Reports retain road, lane, station, and date, applying the specified ASTM, SASO, or contract method without assuming a universal limit.
Our Qassim field team covers work near Al Rass, Al Khabra, Ad Dulaymiyah, An Nabhaniyah, and Dulay Rashid. On normal days, typical arrival starts at 5–20 minutes within Al Rass, while far towns are listed at 70–120 minutes. Paving or cutting time should be coordinated before travel.
For existing distress, photograph its limits first and connect observations to each core number. This keeps the investigation tied to the actual section of a long inter-town road.
Our Qassim field team covers 15 towns and municipalities across five groups around Al Rass. Listed times are typical on normal days and may vary with roads, entry clearance, and site readiness.
Al Rass
Al Badayea, Al Khabra, Riyadh Al Khabra, Qasr Bin Aqil
Al Bukayriyah, Ad Dulaymiyah, An Nabhaniyah, Dukhnah
Al Quwarah, Al Fuwarah, Az Zahiriyah, Dulay Rashid
Uqlat As Suqur, Dariyah
Estimated driving times from the lab on normal days; they can be longer during Ramadan and the Hajj season.
In Short
Asphalt testing is a field and laboratory service for asphalt mixtures and paved layers; it is not asphalt supply or paving-equipment rental. Scope can include Marshall, bitumen content and gradation, maximum theoretical specific gravity, asphalt cores, thickness, density, and compaction. Results are compared with the project specification and approved JMF.
Asphalt quality control connects three stages: source materials, the produced mixture, and the layer after placement and compaction. The JMF records the target composition and limits. Production samples and cores then show whether the tested mixture and paved layer align with the requirements supplied to the laboratory.
Asphalt density alone is not enough to evaluate paving. The reference density, calculation method, core location, layer thickness, and mixture results all matter. The laboratory reports measurements and comparisons, while the authorized project party determines acceptance or corrective action under the contract and specification.
The test package follows the project stage and the question the results must answer.
Testing mix components or production samples against the target mixture.
Sampling or coring with location records, followed by paved-layer measurements.
The governing method, limits, and frequency come from the approved project documents.
Marshall specimen preparation and stability and flow testing
Quantitative extraction of asphalt binder from mixtures
Sieve analysis of extracted aggregate
Maximum theoretical specific gravity of asphalt mixtures (Gmm)
Sampling compacted asphalt mixtures
Bulk specific gravity of non-absorptive compacted specimens
Thickness measurement of compacted asphalt specimens
Every sample should trace to the mix, layer, location, and comparison reference.
1. Review Scope and References
We collect the project specification, JMF, layer type, sampling locations or frequency, and required tests.
2. Sample and Record
The mixture sample or core is identified by date, location, orientation, and layer, with condition recorded on receipt.
3. Test and Calculate
Agreed tests are performed and density or compaction is calculated using the specified reference rather than an assumed generic value.
4. Report and Compare
The report presents methods, results, location data, and the supplied JMF or specification limits, highlighting items needing review.
10 field and laboratory tests available by project scope
Prime Coat Spray Rate (MC1)
معدل رش الطبقة التشريبية (MC1)
Unit: test
Tack Coat Spray Rate (RC2)
معدل رش الطبقة اللاصقة (RC2)
Unit: test
Bitumen Content in asphalt mix
نسبة البيتومين في الخلطة الإسفلتية
Unit: sample
Gradation of asphalt sample
التدرج الحبيبي للأسفلت
Unit: sample
Maximum Theoretical Specific Gravity (Gmm)
أقصى كثافة نوعية نظرية (Gmm)
Unit: sample
Marshall Stability & Flow (6 molds)
الثبات والفاقد — مارشال (6 قوالب)
Unit: sample
Flash Point (bitumen)
نقطة التوهج (البيتومين)
Unit: sample
Viscosity Coefficient (bitumen)
معامل اللزوجة (البيتومين)
Unit: sample
JMF Quality Control (Coarse Agg, Fine Agg, Filler, MC1)
مراقبة جودة مكونات الخلطة (JMF)
Unit: test
Asphalt Core Sampling (with report)
كور أسفلتي (مع تقرير)
Unit: sample
Field and laboratory tests selected to match the project scope
Accumulated technical experience in testing & engineering consultancy
Head office in Makkah, with equipped field teams in all five cities
Test selection by project type, the pre-contract checklist, what drives the quote and what the report contains — on the main service page.
Read the full guideOn normal days, typical arrival starts at 5–20 minutes within Al Rass, then 25–45 minutes for nearby towns, and reaches 90–160 minutes for the outer region. These estimates vary with roads, entry clearance, and site readiness.
Explore the rest of our accredited engineering tests in one place

Soil
A soil testing laboratory covering pre-construction boreholes, in-situ testing, sampling, laboratory analysis, and geotechnical reporting according to each project's scope.

Concrete
Fresh and hardened concrete testing covering slump, temperature, specimens, compressive strength, concrete cores, and non-destructive methods to project specifications.

Aggregate
Fine and coarse aggregate testing for gradation, relative density, absorption, bulk density, abrasion, and soundness by intended use and project specification.

Rebar
Rebar batch testing covering yield, tensile strength, elongation, bend, mass per metre, and chemical composition under the specified grade and project standard.

Chemical
Book a water or soil sample and get results within days — turbidity, total hardness, calcium, magnesium, pH, sulfates and chlorides, for drinking, irrigation, sewage, well, hotel and farm water.

Blocks
Testing for cement blocks, interlock pavers, and curbstones covering dimensions, compressive strength, water absorption, and density by product specification.
Our specialized team is ready to mobilize to your site anywhere in the Kingdom.