On Site During the Pour
Fresh-concrete checks and specimen records before laboratory transfer.
Fresh and hardened concrete testing covering slump, temperature, specimens, compressive strength, concrete cores, and non-destructive methods to project specifications.

Concrete-test logistics in Qassim (Al-Qassim) differ between a pour in Al Rass and a remote agricultural or industrial site. Summers are very hot and dry, while winter nights can be cold, making concrete temperature, sampling time, and early specimen protection important records. Testing represents the sampled material and does not replace control of placing, additions, or curing.
At truck arrival, a representative sample may be taken for slump and temperature, with the vehicle, element, and time recorded. Cubes or cylinders are prepared under the inspection plan, protected, transported, cured, and tested at specified ages. An existing element may instead require cores, ultrasonic pulse velocity, or rebound readings within a location-based investigation.
Our Qassim field team serves Al Rass, Qasr Bin Aqil, Al Bukayriyah, Dukhnah, and Uqlat As Suqur. On normal days, windows run from 5–20 minutes in Al Rass to 90–160 minutes for the outer region. Longer trips require confirmation of supply time and a contact who reports delays.
Provide the element, stated strength, specimen quantity, test ages, and required ASTM or SASO method. Prepare a level area protected from direct sun and vibration before pouring begins. Early schedule changes help prevent arrival before concrete supply or after the sampling opportunity has passed.
Our Qassim field team covers 15 towns and municipalities across five groups around Al Rass. Listed times are typical on normal days and may vary with roads, entry clearance, and site readiness.
Al Rass
Al Badayea, Al Khabra, Riyadh Al Khabra, Qasr Bin Aqil
Al Bukayriyah, Ad Dulaymiyah, An Nabhaniyah, Dukhnah
Al Quwarah, Al Fuwarah, Az Zahiriyah, Dulay Rashid
Uqlat As Suqur, Dariyah
Estimated driving times from the lab on normal days; they can be longer during Ramadan and the Hajj season.
In Short
A concrete testing laboratory evaluates fresh concrete on site and hardened concrete in the laboratory or an existing structure. The scope can include sampling, slump and temperature, compressive strength, concrete cores, and non-destructive tests. Test frequency, specimen quantity, ages, and acceptance criteria follow the project specification and approved inspection plan.
Concrete testing does not begin at specimen crushing. A useful result depends on representative sampling, recording the pour and element location, preparing and curing specimens, and applying the specified test method. We connect field records, specimen identification, and laboratory results in one traceable workflow.
The service supports pour monitoring, compressive-strength verification, and post-pour investigation when a result needs review or an existing structure is being assessed. The laboratory does not independently accept or reject a structural element; results are compared with the design requirement and project specification for the engineer or consultant to evaluate.
We define the test matrix from the project specification and concrete condition instead of applying one package to every project.
Fresh-concrete checks and specimen records before laboratory transfer.
Hardened-specimen tests or post-pour investigation for the defined purpose.
The governing method, sampling frequency, and acceptance criteria come from the approved project documents.
Making and curing concrete test specimens in the field
Slump testing of fresh concrete
Compressive strength of cylindrical concrete specimens
Obtaining and testing drilled cores from existing structures
Rebound number of hardened concrete using a Schmidt hammer
Ultrasonic pulse velocity through concrete
Electrical indication of resistance to chloride ion penetration
The schedule, visit count, and specimen matrix are confirmed in the scope before work starts.
1. Review Pour Requirements
We collect the site, pour window, structural element, design requirement, and inspection plan or consultant instruction.
2. Field Testing
The technician performs the agreed field tests, takes specimens, and records the pour and sampling details.
3. Transfer, Curing, and Testing
Specimens are transferred, cured, and tested at the specified ages while each specimen set remains identifiable.
4. Issue Results
The report presents specimen data, test method, results, and the recorded requirement, highlighting results that need technical review.
12 field and laboratory tests available by project scope
Pour supervision + temp/slump + cube sampling (7 & 28 day)
الإشراف على صب الخرسانة + هبوط + عينات مكعبات (7 و28 يوم)
Unit: sample
Air Content
محتوى الهواء
Unit: test
Unit Weight
وزن الوحدة
Unit: test
Initial & Final Setting Time
زمن الشك الابتدائي والنهائي
Unit: test
Thermocouple Test (mass concrete)
مراقبة حرارة الخرسانة الكتلية (Thermocouple)
Unit: test
Bleeding of Fresh Concrete
نسبة النضح
Unit: test
Concrete Core Samples (with report)
كور خرساني (مع تقرير)
Unit: sample
Ferro Scan (rebar detection)
الكشف عن حديد التسليح (Ferro Scan)
Unit: point
Schmidt Rebound Hammer
مطرقة الارتداد شميدت
Unit: point
Ultrasonic Pulse Velocity (UPVT)
الموجات فوق الصوتية (UPVT)
Unit: test
Half Cell Potential (corrosion)
نسبة الصدأ في حديد التسليح
Unit: test
Concrete Durability Package (5 tests)
حزمة ديمومة الخرسانة (5 اختبارات)
Unit: sample
Field and laboratory tests selected to match the project scope
Accumulated technical experience in testing & engineering consultancy
Head office in Makkah, with equipped field teams in all five cities
Test selection by project type, the pre-contract checklist, what drives the quote and what the report contains — on the main service page.
Read the full guideOn normal days, typical arrival starts at 5–20 minutes within Al Rass, then 25–45 minutes for nearby towns, and reaches 90–160 minutes for the outer region. These estimates vary with roads, entry clearance, and site readiness.
Explore the rest of our accredited engineering tests in one place

Soil
A soil testing laboratory covering pre-construction boreholes, in-situ testing, sampling, laboratory analysis, and geotechnical reporting according to each project's scope.

Asphalt
Asphalt mixture and pavement testing covering Marshall, binder content, gradation, Gmm, cores, thickness, density, and compaction to project specifications.

Aggregate
Fine and coarse aggregate testing for gradation, relative density, absorption, bulk density, abrasion, and soundness by intended use and project specification.

Rebar
Rebar batch testing covering yield, tensile strength, elongation, bend, mass per metre, and chemical composition under the specified grade and project standard.

Chemical
Book a water or soil sample and get results within days — turbidity, total hardness, calcium, magnesium, pH, sulfates and chlorides, for drinking, irrigation, sewage, well, hotel and farm water.

Blocks
Testing for cement blocks, interlock pavers, and curbstones covering dimensions, compressive strength, water absorption, and density by product specification.
Our specialized team is ready to mobilize to your site anywhere in the Kingdom.